Design of the injection mould for the long pole of dropping bottle;
点滴瓶长杆注射模具设计
Crack problem of die was solved and requirement of manufacturing long rod part in punch press was fulfilled.
解决了其凹模易裂问题,实现了在冲压设备上热镦长杆零件的需求。
Dynamics Analyzing on Slender Rod Machining by Axial Turn-milling
轴向车铣细长杆的动力学分析
The experiment on finish machining the slender rod with weak rigidity by the orthogonal turn milling and the turning were done respectively.
分别采用正交车铣和车削对弱刚度细长杆类零件进行了精加工试验研究,试验结果表明,对弱刚度细长杆采用正交车铣加工比传统车削加工能够得到更小的表面粗糙度值和更高的加工精
According to horizontal vibration theory of beam of u- niform section,the kinetic model of the orthogonal turn-milling slender rod is presented,and according to the peculiarity of the turn-milling cutting force,the simplify cutting force model is presented.
根据等截面梁横向振动理论,建立了正交车铣加工细长杆的动力学模型,并根据车铣切削力的特点,建立了切削力的简化模型。
Analysis and design of transformable cam-five-bar mechanism
可变杆长的凸轮—五杆机构分析与设计
Deseign of a Simpie and Easy Method for the Definite Length Planer Four-Bar Linkages
给定杆长的平面四杆机构简易设计方法
a long [ thin ] shank
[蔑]长[细]脚杆
a cross with equal-length diagonal bars.
有等长斜杆的十字架。
The long pole was wagging about in the breeze.
长杆在微风中摇晃着。
extension arbor for Morse taper bush with tang
带扁尾莫氏锥套接长杆
extension arbor for Morse taper bush without tang
无扁尾莫氏锥套接长杆
a long staff with one end being hook shaped.
一头被做成钩形的长杆。
a railing with long spikes on top
顶端有长长的尖铁的栏杆
The 3rd hole has few fairway, 3 pars, 225 yards apart.
几乎没有球道的第3洞，标准杆为3杆，长225码。
The harnessing pole attached to the front axle of a horse-drawn vehicle.
辕杆马车前轴上固定着的控制马匹的长杆
Uprights: The vertical poles which hold the bar in high jump and pole vault in place.
托竿：安放跳高和撑杆跳高横杆的直立长竿。
A rail and the row of balusters or posts that support it, as along the front of a gallery.
栏杆横栏和一排栏杆或支撑柱，如沿长廊前部的栏杆
Stem extensions are available in lengths up to 10 feet. For stem extensions in excess of 10 feet consult us.
阀杆延长件长度可达10英尺。如果阀杆延长件长度超过10英尺请与我们联系。
a metal bar (or length of pipe) used as a lever.
用作杠杆的金属条（或长管子）。
a long pole used to propel or guide a barge.
驱动或导引驳船的长杆子。
The force required depends on the length of the lever arm used .
所需的力取决于所使用杠杆臂的长度。
In the Pointer Trail area, drag the Length slider.
在“指针尾部”区，拖动“长度”滑杆。
