Finite Element Simulation of Stress and Strain of Concasting Slab during Straightening;
连铸板坯矫直过程应力应变的有限元模拟
Temperature stress and strain control technology of hollow high pier construction;
70m以上空心高墩施工的温度应力应变控制
Study of pipeline stress and strain automatic monitoring system;
长输管道应力应变自动化监测系统研究
Analysis on the factors influencing stress-strain of mining field and mine roadway;
影响采场和巷道应力应变因素分析
Research on stress-strain of oil seed by cold pressing;
油料冷榨的应力应变关系研究
Research on stress-strain of rapeseed by uniaxial pressing underdouble-surface for flow of fluids through a porous medium;
侧限双面渗流压榨下的菜籽应力应变关系研究
To adopt finite meta method analyzes stress strain action of Al-plastic compound pipe under Analog load status and studies the influence of load capacity by variation of diameter of medium Al layer and change of joint part length lap joints.
采用有限元方法分析了铝塑复合管在模拟承载状态下的应力应变行为,研究了中间铝层的直径变化以及搭接接头搭接部分长度的变化对承载行为的影响。
The varied laws of the extrusion pressure and stress strain with extrusion parameters in the sample are obtained.
5软件对不同挤压参数下钨合金静液挤压过程进行了数值模拟研究 ,得出了挤压压力、试样内部应力应变场随挤压参数的变化规律 ,并与光刻网格的挤压结果进行了比较 ,说明有限元法的计算结果和实验结果符合很好。
The mathematical model of crack prediction and the crack criterion based on strain-stress and the difference of strain energy producing crack were introduced.
汇总了通过监测结晶器热行为和铸坯与结晶器之间的摩擦力预测结晶器内连铸坯表面裂纹形成的研究工作,介绍了用于预测连铸裂纹的数学模型以及基于临界应力应变和形成裂纹变形能差的连铸裂纹判据,提出了裂纹预测研究的发展方向。
Shaping principles of the new method and design of the rolling tool were introduced briefly,FEM DEFORM-3D was used to simulate the shaping process and the ideal simulated fins structures were obtained,the strain-stress state of workpiece and applied force of rolling tool in shaping process were analyzed.
采用一种新型滚压工艺进行板式翅片加工,简述了板式翅片的成形原理及滚压刀具的设计原则;利用DEFORM-3D软件对其成形过程进行模拟仿真,获得了理想的模拟翅片结构;分析了成形过程中工件的应力应变状态和滚压刀具在成形中的受力状况,通过加工实验验证了该方法的可行性。
For the design, it is essential to characterize the strain and stress of the sensing element, which is an annular flat membrane in E-type structure.
基于E型膜片已设计出一种三轴线加速度计;此E型膜片的敏感弹性部分为圆环平膜片,对其应力应变特性的分析至关重要。
Effect of notch root radius on stress-strain distribution and martensite transformation of shape-memory alloy NiTi in front of notch;
缺口根半径对NiTi形状记忆合金缺口前应力-应变分布和马氏体相转变的影响
Tensile stress-strain behavior of butadiene rubber/organo-montmorillonite nanocomposite Ⅰ.Stress-strain curves and its simulation;
顺丁橡胶/有机蒙脱土纳米复合材料的拉伸应力-应变行为 Ⅰ.应力-应变曲线及其理论模拟
Reasonable descriptions on some problems of stress-strain and their invariables;
有关应力-应变及其不变量若干问题的合理表述
nonlinear stress strain relation
非线性应力应变关系
Calculation and Experimental Study of Strain-stress of Thermal Equipment of Power Plant;
电力热力设备应力应变分析计算及实验研究
temperature-stress-strain diagram
温度-应力-应变图
stress-formation diagram
胁强[应力]-形变图
Strain is proportional to stress.
应变量与应力成正比。
proportionality of stress to strai
应力与应变的比例性
calculate the strains and stresses of a bridge
计算桥梁的应变和应力
biaxial stress strain relation
双轴应力-应变关系
(resistance) strain gauge force transducer
（电阻）应变式力传感器
(resistance) strain gauge drawing force transducer
（电阻）应变式拉力传感器
extrusion stress
(塑性变形的)挤压应力
strain-gauge-type pressure transducer
应变仪式压力传感器
strain gauge pressure transducer
应变（计）式压力传感器
strain gauge-type load cell
应变仪式测力传感器
the shear changed the quadrilateral into a parallelogram.
外力使物体发生剪应变。
experimental fusion power reactor
实验聚变动力反应堆
The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material.
应力与应变之比，即每单位应变的应力，叫做该材料的弹性模量。
Deformation in which stress and strain are proportional is called elastic deformation.
应力与应变成正比关系的形变称为弹性形变。
